Search results

Universal communication unit - router, protocol converter, data concentrator. Protocol support for – IEC 61850, IEC 60870-5-101, IEC 60870-5-103, IEC 60870-5-104, DNP3, MODBUS, HIOCom2, DLMS. Equipped with GSM/UMTS/LTE modem, 2 x 100Mb Ethernet, ...

Blind for slot in RTU7M

Blind for RTU7M with redundant backplane

RTU7M DI10-UPX DO05-U

Blind for first (wider) slot in RTU7M

Charging card for 24V battery backup for RTU7M

Charging card for 48V battery backup for RTU7M

Signaling and control panel, mounting on RTU7M chassis, Czech version, powering 5 V DC

Signaling and control panel, mounting on RTU7M chassis, English version, powering 5 V DC

Signaling and control panel, mounting on RTU7M chassis, Czech version, powering 5 - 30 V DC

Signaling and control panel, mounting on RTU7M chassis, English version, powering 5 - 30 V DC

Universal communication unit - router, protocol converter, data concentrator. Protocol support for – IEC 61850, IEC 60870-5-101, IEC 60870-5-103, IEC 60870-5-104, DNP3, MODBUS, HIOCom2, DLMS. Equipped with GSM/UMTS/LTE modem, 2 x 100Mb Ethernet, ...

RTU7M FW License extension - 5 credits package, see the license policy for ELVAC RTU communication protocols (https://www.rtu.cz/en/products/rtu-support-software/licensing-policy-for-elvac-rtu-firmware)

20 x DO (elektronic relay 60 V DC / 40 V AC / 800 mA)

10 x DO (mechanical relay)

Power supply isolated card 10-60V DC (60W)

Power supply isolated card 10-60V DC (60W), equipped with input voltage measurement

Power supply isolated card 80-275V DC (50W), redundancy support

Power supply isolated card 80-275V DC (50W), equipped with input voltage measurement, redundancy support

Communication card with embedded PC, 5 interfaces – 2 x Ethernet 100 Mb, 2 x RS-232/422/485, console.

Card for temperature measurement, 8 independent inputs for PT100, PT1000, Ni120, or thermocouple K-Type.

Communication card with embedded PC, 5 interfaces – 2 x Ethernet 100 Mb, 2 x RS-232/422/485, console, version for upgrades of systems with older types of busbars, but it is possible to use it in new busbars as well.

20 x DI, passive (wet contact), 24 V DC (both polarities) or AC

20 x DI, passive (wet contact), 48 V DC (both polarities) or AC

20 x DI, passive (wet contact), 230 V DC (both polarities) or AC, 300V/CAT III

20 x DI, active (dry contact), 24 V DC

20 x DI, passive (wet contact), 110 V DC (both polarities) or AC

20 x DI, passive (wet contact), 12 V DC (both polarities) or AC

4x3xAI, indirect, +/-5mA DC, 5mA AC, overloadability permanently 1,2xIn, isolated

Card with 5x Ethernet switch

Communication card, Ethernet, 2x CIOMOD-OPT, RS-232/485.

Communication card, Ethernet, 2x CIOMOD-OPT, COM2 = OPT.